The new standard provides clarification for environmental professionals and Phase I ESA users. Included within the changes are the following concepts:

1. Simplification of the definition of “recognized environmental condition”.
2. New defined term “controlled recognized environmental condition” (CREC) to address continuing obligations and limitations on use.
3. Vapor migration evaluations are mandatory under the new standard.
4. Environmental professionals must explain in greater detail their rationale for reviewing or not reviewing a regulatory file.

In summary, it is likely that the EPA’s “all appropriate inquiry standard” will change to reflect the new ASTM-E1527-13 Standard published in November. The new standard should be become law sometime in late December or early January. It is important that all environmental documents be updated to reflect this new standard and care should be taken to ensure implementation of it in your business endeavors.

The post Alert: Phase I ESA Changes appeared first on Dawda PLC.

A properly conducted environmental audit is necessary for the future landowner to determine whether the property has contamination present and to demonstrate that the landowner made such a reasonable inquiry. For those entities that are considering the purchase of a historically contaminated parcel and are pursuing status as a bona fide prospective purchaser and innocent landowner status, or parties that are pursuing Brownfield grants awarded under CERCLA, they will want to comply with this change in ASTM’s standard for undertaking a Phase I audit.

By way of background, in 2002 the Brownfield Amendments to CERCLA set forth a requirement that EPA develop regulations and standard practices for conducting an all appropriate inquiry. EPA in 2005 referenced ASTM E1527-05 as setting forth the standard for conducting a Phase I Environmental Site Assessment and the EPA in 2008 updated this to incorporate ASTM E2247-08.

When the ASTM Association completed its preparation of the ASTM E1527-13, it contacted the EPA and requested a determination as to whether EPA considered ASTM’s revised standard as being compliant with the All Appropriate Inquiries Rule. EPA has made it clear that the issuance of this final rule is a determination, based on EPA’s finding that the ASTM E1527-13 standard is compliant with All Appropriate Inquiry Rules.

This final rule originally went out to public comment in August of 2013, and EPA received significant adverse comments and EPA chose to withdraw the rule on October 29, 2013. With this passage of the final rule on December 30, 2013, EPA made it clear that it will now proceed with amending the All Appropriate Inquiry Rule to reference ASTM E1527-13 and will allow for public comment on that specific issue.

The post Changes to Phase I Environmental Audits (Part I) appeared first on Dawda PLC.

It is EPA’s belief that ASTM E1527-13 is an improvement over prior standards as it increases the level of inquiry done by future property owners making property transaction decisions. It also assists new property owners in defining any continuing obligations they may have when operating on a historically contaminated site and how to maintain any liability protection afforded by CERCLA.

ASTM E1527-13 include multiple changes to the definitions of key terms in Phase I audits, including:

(1) Recognized Environmental Condition (REC) – A REC under ASTM E1527-13 includes any release, or likely threat of a future release of a hazardous substance or petroleum products to the environment or property. De minimis conditions are generally not considered REC’s.

(2) Historical Recognized Environmental Conditions (HREC) – This new standard for a HREC contemplates that prospective purchasers will pursue additional information regarding the nature of the historical release of the property so as to make an informed decision regarding their potential future use of the property. A HREC designation is limited to past releases that have been addressed to an unrestricted residential standard and meet applicable regulatory standards. This may require a comparison between cleanup standards used at time of the remediation and cleanup standards in place at the time of Phase I audit is prepared.

(3) Controlled Recognized Environmental Conditions (CREC) – This new category is for a release that may have been cleaned to something less than unrestricted use, such as to commercial/industrial standard. Hazardous substances are allowed to remain on site and there are risk based restrictions such as institutional controls.

(4) De minimis Conditions – While an environmental consultant may consider minor conditions as de minimis, this does not include a CREC.

(5) Migrate and Migration – This includes the movement of vapors.

(6) Release – Has been revised to parallel CERCLA and excludes releases solely associated with the workplace.

The ASTM Standard also provides greater guidelines as to the significant role environmental consultants have to thoroughly review reasonably available regulatory agency files and records. The consultants should verify agency information and confirm information taken from databases. With respect to undertaking regulatory agency file and record reviews, ASTM E1527-13 provides a more standardized framework for verifying what is known about environmental conditions on the property.

A more complex and significant change in the scope of the Phase I audit includes, an

assessment of the potential for vapor releases. By redefining the definition of migration to include the movement of vapors from hazardous substances, Phase I assessment will include an assessment of the indoor air pathway. At a minimum the ASTM E1527-13 standard suggests that a Phase I assessment of a historically contaminated site, should consider the vapor intrusion pathway, just like any other exposure pathway. Because this is the Phase I assessment it may be sufficient to conclude that given the release of hazardous substances from contaminated soil or groundwater, vapor intrusion is a potential REC. This is especially true in the case of off-site releases on to the property. Some environmental consultants may address this issue in the Phase I audit, without collecting air or subsurface samples. A more detailed discussion regarding vapor intrusion and the ASTM Standard will be discussed in the blog entry to follow.

The EPA in making its announcements of the final rule acknowledges that ASTM’s new standard constitutes a consensus of an esteemed technical committee. EPA has stated that ASTM E1527-13 having already been published it is considered a public printed standard. The EPA has suggested that this standard is well known and readily available to prospective purchasers and sellers. The EPA does not discuss the potential confusion and lack of clarity that may exist for parties that do not have ready access to ASTM standards.

The EPA intends to specifically incorporate ASTM E1527-13 and by rulemaking it will revise the All Appropriate Inquiry Rule to reflect this standard change. The EPA states that this final rule became effective immediately, per its issuance on December 30, 2013, without the usual 30-day waiting period prescribed by the Administrative Procedures Act (APA) because this rule change does not

“create any new regulatory requirements or take other action for which effective parties would need time to prepare before the rule takes effect. Rather, this action merely offers parties the option of using an additional ASTM International Standard to conduct all appropriate inquiries. Today’s rule does not require that any party use this standard. Therefore, this revision became effective on the date of publication.” (70 Fed. Reg. 79321)

Therefore, technically, one could argue that ASTM E1527-05 is still an acceptable standard for a Phase I audit for CERCLA purposes, until EPA completes its rulemaking process.

The post A Closer Look at ASTM E1527-13 ( Part II ) appeared first on Dawda PLC.

This concern over vapor intrusion as an exposure pathway was first raised by toxicologists evaluating the correlation between indoor air quality and human health. Toxicologists reviewed the effects of human exposure to low level volatile organic compounds and carcinogens such as benzene and concluded that there is a cancer risk posed to building occupants from vapor migration into the building.

The concern over vapor intrusion include an initial assessment during the Phase I audit, to evaluate the risk for vapor intrusion. The generally accepted protocol for testing is set forth in ASTM E2600-10 entitled, “Standard Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions.” For most consultants the focus for assessing the risk posed by vapor intrusion will be on sites where volatile chemicals are present. These typically include sites where gasoline and dry cleaning have contaminated the subsurface soils and groundwater, below or near a building. Then this contamination may accumulate so that vapors can find pathways through cracks or crevices into the indoor air. This indoor air pathway can be of particular concern in many modern airtight buildings. The focus of the analysis is defining the Vapor Encroachment Condition, which is “the presence or likely presence of vapors in the subsurface of the targeted property caused by the release of vapors from contaminated soil or groundwater either on or near the targeted property”.

Lenders in real estate transactions have also raised their concern over how to quantify the risk posed by vapor intrusion and how to meet the standard recently adopted ASTM E1527-13. Because ASTM added movement of vapors in the subsurface to the definition of “migrate”, a Phase I audit will include an assessment of the migration of vapors from soil and groundwater as a part of the evaluation of whether hazardous substances have likely migrated within the property.

Consultants have been wrestling with the issue of what changes should be made in the scope of the Phase I audit to include an assessment of vapor intrusion. But, the more complex questions are developing standards for assessing vapor intrusion in the course of a Phase I audit.

By its very nature vapor migration can move in any direction and can migrate through a myriad of routes, including utility lines making sampling difficult. Further complicating the ability to characterize vapor intrusion is the fact that such vapors are affected by soil chemistry, the presence of groundwater, site specific factors, seasonal changes, barometric pressure, the operation of any heating, ventilation and cooling systems, the use of chemicals on the property, proximity to other businesses and motor vehicles. Some within the scientific field have argued that there is a great deal of uncertainty inherent in vapor intrusion studies that fail to take into consideration the complex factors that effect this exposure pathways. Results are often inconsistent and time sensitive for the consultant making any determination that chemicals present in vapor are attributable to subsurface soil or groundwater conditions is almost impossible, given the inability to eliminate all other sources

Consultants are also evaluating the unique challenges posed by this risk pathway, and there is some lack of consensus on, how to;

1. Properly communicating what the risk is to property owners;

2. Identify which properties merit a vapor intrusion investigation;

3. Determine background level for vapors;

4. Determine how much testing is sufficient to characterize conditions;

5. Prepare a model that considers alternative factors;

6. Manage the identified risk;

7. Respond to changing thresholds, screening values and guidelines;

8. Identify all sources; and

9. Eliminate factors such as HVAC systems or operational chemicals.

Just as consultants have improved their vapor sampling methodology, better methods are being developed to manage this risk. While at first glance cleaning up of contaminated soils or groundwater may be a permanent fix for vapor intrusion, there are less expensive alternatives that may be available. Some of these potential remedial measures include;

1. Increasing the HVAC’s capacity to increase air exchanges;

2. Use of passive systems to vent conditions below the building slab;

3. Active systems and fans to blow vapors away;

4. Use of impermeable layers beneath the concrete slab so as to create a barrier that prevents the vapors from entering the building.

Consultants are debating the consequences of having not tested for vapor intrusion in conjunction with past property transactions and what that might mean in demonstrating sufficient due diligence and conducting a sufficient appropriate inquiry. Environmental attorneys and property owners may also need to explore what the risk of vapor intrusion means in the context of past purchase and their redevelopment plans.

As concern over vapor intrusion continues to pick up steam, others have raised the question of what this means in the field of toxic tort litigation. Even without adequate data to demonstrate cause and effect, plaintiffs’ attorneys have eyed this pathway as an additional count in litigation. Previously cases in which plaintiffs have not demonstrated direct exposure from hazardous waste on an abutting property, may now find they can bring a viable claim for injury from exposure to vapors migrating in crevices in the ground. All of these liability scenarios can be potential nightmares for property owners unless they follow the evolving science and are prudent in addressing historical contamination and assessing indoor air. We will continue to follow these developments.

The post Vapor Intrusion and the Audit Process ( Part III ) appeared first on Dawda PLC.